赵士腾

发布时间:2021-07-03  浏览次数:

职务职称:教授,博士生导师

所在单位:材料科学系

联系电话:

电子邮箱:szhao@buaa.edu.cn

办公地点:IRC 423



Ø 基本情况:

赵士腾,教授,博士生导师,2010年本科毕业于北京科技大学材料科学与工程专业,2013年获得德国亚琛工业大学冶金工程专业硕士,2017年获得加州大学圣地亚哥分校材料科学博士,2018-2021年于加州大学伯克利分校和劳伦斯伯克利国家实验室-国家电镜中心从事博士后研究,20215月入职北航材料科学与工程学院。近年来在国际顶级期刊发表文章38篇,其中以第一作者(含共一)/通讯作者身份发表代表性论文13篇,包括 Nature 1篇),Science (1) Nature Materials1篇),PNAS (2) Science Advances2篇),Materials Today 1篇),Acta Materialia4篇),曾获国家优秀自费留学生奖学金,Acta Materialia论文奖,Gareth Thomas杰出青年材料学家奖。2020年入选国家级青年人才计划。


Ø 研究方向:

1)先进结构材料在极端(高压、高温、高应变速率)条件下的力学行为

2)先进金属材料的合金设计、强韧化机理研究及多尺度微观组织调控

3)透射电子显微学


Ø 教学科研成果

代表性论文:

[1] S. Zhao, C. Meng, F. Mao, W. Hu, G. Gottstein: Influence of severe plastic deformation on dynamic strain aging of ultrafine grained Al–Mg alloys. Acta Materialia 2014; 76:54-67.  

[2] S. Zhao, B. Kad , E. N. Hahn, B.A. Remington, C.E. Wehrenberg, C.M. Huntington, H.-S. Park, E. M. Bringa, K.L. More, M.A. Meyers, Pressure and Shear Induced Amorphization of Silicon, Extreme Mechanics Letters 2015 5: 74-80.

[3] S. Zhao, E. N. Hahn, B. Kad, B. A. Remington, C.E. Wehrenberg, E. M. Bringa, M. A. Meyers, Amorphization and Nanocrystallization of silicon under shock compression, Acta Materialia 2016 103:519-533.

[4] S. Zhao, E.N. Hahn, B. Kad, B.A. Remington, E.M. Bringa, M.A. Meyers, Shock compression of [001] silicon single crystal, European Physical Journal: Special Topics 2016; 225, 335-341.

[5] S. Zhao, B. Kad, B. A. Remington, C.E. Wehrenberg, J. Lasalvia, K. Beuler, M.A. Meyers, Directional amorphization of boron carbide subjected to laser shock compression. Proc. Nat. Acad. Sci. U.S.A. 2016; 113;12088-12093.

[6] S. Zhao, B. Kad, C.E. Wehrenberg, B.A. Remington, E.N. Hahn, K.L. More, M.A. Meyers, Generating Gradient Germanium Nanostructures by Shock-induced Amorphization and Crystallization. Proc. Nat. Acad. Sci. U.S.A. 2017, 114, 9791-9796.

[7] S. Zhao*, R. Flanagan, E.N. Hahn, B. Kad, B.A. Remington, C.E. Wehrenberg, R. Cauble, K. More, M.A. Meyers*, Shock-induced amorphization in silicon carbide. Acta Materialia, 2018, 158, 206-213.(通讯作者)

[8] T.P. Remington, E.N. Hahn, S. Zhao*, R. Flanagan, J.C.E. Mertens, S. Sabbaghianrad, T.G. Langdon, C.E. Wehrenberg, B.R. Maddox, D.C.Swift, B.A. Remington, N. Chawla, M.A. Meyers*, Spall strength dependence on grain size and strain rate in tantalum, Acta Materialia, 2018, 158, 313-329. (通讯作者)

[9] Z. Li, S. Zhao, R.O. Ritchie, M.A. Meyers, Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys, Progress in Materials Science, 2018, 102, 296-345.

[10] S. Zhao, R. Zhang, T. Pekin, A. Minor, Probing Crystalline Defects Using an EBSD-based Virtual Dark-Field Method, Microscopy and Microanalysis, 2019, 25, 1992-1993.

[11] R. Zhang†, S. Zhao†, C. Ophus, T. Pckin, Y. Deng, S.J. Vachhani, B. Ozdol, R. Traylor, K. Bustillo, M. Poschmann, J.W. Morris Jr, D.C. Chrzan, M. Asta, A. M. Minor, Direct imaging of short-range order and its impact on deformation in Ti-6Al, Science Advances, 2019, 5, eaax2799. (共同一作)

[12] R. Zhang†, S. Zhao†, J. Ding, C. Ophus, M. Asta, R. Ritchie, A.M. Minor, Short-range order and its impact on the CrCoNi medium-entropy alloy, Nature, 2020, 581, 283-287. (共同一作)

[13] B. Savitzky, S. Zeltmann, L. Hughes, H. Brown, S. Zhao, P.Pelz, T. Pekin, E. Barnard, J. Donohue, L. DaCosta, E.Kennedy, Y. Xie, M.Janish, M.Schneider, P.Herring, C. Gopal, A.Anapolsky, R. Dhall, K. Bustillo, P.Ercius, M.Scott, J.Ciston, A.Minor, C.Ophus, py4DSTEM: a Software Package for Four-Dimensional Scanning Transmission Electron Microscopy Data Analysis, Microscopy and Microanalysis, 2021, 1-32.

[14] D. Giuntini, S. Zhao, T. Krekeler, M. Li, M. Blankenburg, B.Bor, G. Schaan, B. Domenech, M. Mueller, I. Scheider, M. Ritter, G. Schneider, Defects and plasticity in ultrastrong supercrystalline nanocomposites, Science Advances, 2021, 7(2), eabb6063.

[15] F. Cao, Y. Chen, S. Zhao, E. Ma, L. Dai, Grain boundary phase transformation in a CrCoNi complex concentrated alloy, Acta Materialia, 2021, 209, 116786.

[16] S. Zhao, R. Zhang, Y. Chong, X. Li, A, Abu-Odeh, E. Rothchild, D. Chrzan, M. Asta, J.W. Morris Jr, A. Minor, Defects reconfiguration in a Ti-Al alloy via electroplasticity, Nature Materials, 2021, 20 (4), 468-472.

[17] S. Zhao, Z. Li, C. Zhu, W. Yang, Z. Zhang, D. Armstrong, P. Grant, R. Ritchie, M. Meyers, Amorphization in extreme deformation of the CrMnFeCoNi high-entropy alloy, Science Advance, 2021, 7(2), eabb6063.

[18] S. Zhao, R. Zhang, Q.Yu, J. Ell, R. Ritchie, A.Minor, Cryoforged nanotwinned titanium with ultrahigh strength and ductility, Science, 2021,373(6561),1363-1368.

[19] S. Zhao, B. Li, B. Remington, C. Wehrenberg, H. Park, E. Hahn, M. A. Meyers, Directional amorphization of covalently bonded solids: a generalized deformation mechanism in extreme loading, Materials Today, 2021,49,59-67.

[20] B. Li, AC Li, S. Zhao*, M.A. Meyers, Amorphization by mechanical deformation, Materials Science and Engineering: R: Reports2022149, 100673. (通讯作者)


更多新闻