鲁园园

发布时间:2018-11-07  浏览次数:

职务职称:副教授,博士生导师

所在单位:材料加工工程与自动化系

联系电话:010-82338561

电子邮箱:luyy87@buaa.edu.cn

办公地点:新主楼D426





Ø 基本情况:

2007年本科毕业于北京科技大学材料成型及控制工程专业,同年免试推荐至北京航空航天大学材料科学与工程学院并于2010年获硕士学位。2010-2014年于美国北卡罗来纳大学夏洛特分校机械工程系攻读博士学位。2015-2019年先后在日本东北大学金属材料研究所及材料科学学部从事博士后研究工作。2019-2020任日本东北大学材料科学学部特任助理教授。202012月至今任北京航空航天大学材料科学与工程学院副教授,入选国家级青年人才项目。

主要从事航空发动机高温结构材料、高性能铝合金等金属材料的制备加工、组织表征及性能评价相关研究工作,以第一作者/通讯身份在Acta Mater.Intermetallics Mater. Sci. Eng. A等学术期刊上发表论文十余篇,并在TMS等国际重要会议上做邀请报告。


Ø 主讲课程:

研究生课程:《先进结构材料力学性能测试与分析方法》

本科生课程:《金属凝固原理与工艺》、《科研课堂》


Ø 研究方向:

1)高温结构材料(钛铝合金、钼基合金等)

2)高性能铝合金

3)金属材料的力学性能及变形机理


Ø 教学科研成果:

代表性论文:

[1] Y. Lu, R. Kotoka, J.P. Ligda, et al., The microstructure and mechanical behavior of multilayered Mg/Ti nanofilms as a function of layer thickness, Acta Materialia 63 (2014) 216-231.

[2] Y. Lu, M. Watanabe, R. Miyata, et al., Microstructures and mechanical properties of TiC-particulate-reinforced Ti–Mo–Al intermetallic matrix composites, Materials Science and Engineering A 790 (2020) 139523.

[3] Y. Lu, J. Yamada, R. Miyata, et al., High-temperature mechanical behavior of B2-structured Ti–Mo–Al alloys, Intermetallics 117 (2020) 106675.

[4] Y. Lu, N. Sekido, K. Yoshimi, et al., Microstructures and mechanical properties of Mg/Zr nanostructured multilayers with coherent interface, Thin Solid Films 712 (2020) 138314

[5] Y. Lu, J. Yamada, J. Nakamura, et al., Effect of B2-ordered phase on the deformation behavior of Ti-Mo-Al alloys at elevated temperature, Journal of Alloys and Compounds 698 (2017) 130-135.

[6] Y. Lu, R. Kotoka, J.P. Ligda, et al., Morphological and mechanical stability of HCP-based multilayer nanofilms at elevated temperatures, Surface and Coatings Technology 275 (2015) 142-147..

[7] Y. Lu, J. Zhang, L.X. Tian, et al., Microstructural evolution of unidirectionally solidified NbSS-Nb5Si3 eutectic Alloy, Rare Metals 30 Suppl. 1 (2011) 335.

[8] S.Y. Kamata, D. Kanekon, Y. Lu, et al., Ultra-high temperature tensile creep of MoSiTiC alloy, Scientific Report 8 (2018) 10487.

[9] X. Nan, M. Zhao, Y. Lu, et al., High-temperature oxidation behavior of a Ti5Si3-incorporated MoSiBTiC alloy, Intermetallics 125 (2020) 106895.