邱春雷

职称职务:教授,博士生导师
所在单位:材料加工工程及自动化
联系电话:
电子邮箱:chunlei_qiu@buaa.edu.cn
办公地点:4-313B

 

基本情况

邱春雷,男,1980年11月出生,中组部第十三批“青年千人计划”入选者, 现为北京航空航天大学材料科学与工程学院教授,博士生导师。

2003年本科毕业于武汉科技大学冶金工程专业;2006年获得华中科技大学材料学硕士学位;2010年获得英国伯明翰大学冶金与材料学系哲学博士学位(高温合金粉末热等静压净成型)。博士毕业后继续在伯明翰大学从事研究员工作,主要研究金属激光增材制造。2016年4月至2017年6月任职于英国卡迪夫大学工程学院助理教授。过去十年的研究主要是利用先进净成型技术包括激光增材制造及热等静压净成型技术制备大型航空部件以及研究净成型工艺-结构完整性/微观结构-性能之间的关系,作为主要研究者之一参与英国及欧盟多个主要的净成型及金属增材制造项目包括REMAC, SAMULET, AMAZE, AccMet等,先后与Rolls-Royce plc, BAE System, MBDA, Safran, Thales, ESA, Caterpillar,Airbus等英国及欧盟主要航空航天公司及机构展开合作研究。在Acta Mater, Mater Des, JAC, MSEA等期刊发表30余篇SCI论文,被引用次数750余次。受邀担任Acta Mater, Mater Des, JAC等十几个期刊的审稿人。



主讲课程

 



研究方向

1) 金属激光增材制造及修复

2) 粉末热等静压净成型

3) 高温合金

4) 钛合金


研究成果

1.C.L. Qiu, C. Panwisawas, M. Ward, H.C. Basoalto, J.W. Brooks, M.M. Attallah. On the role of melt flow into the surface structure and porosity development during selective laser melting. Acta Materialia. 2015, vol. 96, pp. 72-79.

2.C.L. Qiu, N.J.E. Adkins, M.M. Attallah. Selective Laser Melting of Invar 36: Microstructure and Properties. Acta Materialia. 2016, vol. 103, pp. 382-395.

3.C.L. Qiu, N.J.E. Adkins, H. Hassanin, M.M. Attallah, K. Essa. In-situ shelling via selective laser melting: modelling and microstructural characterisation. Materials and Design. 2015, vol. 87, pp. 845-853.

4.C.L. Qiu, N.J.E. Adkins, M.M. Attallah. Microstructure and tensile properties of laser-melted and of HIPed laser-melted Ti-6Al-4V. Materials Science and Engineering A. 2013, vol. 578, pp. 230-239.

5.C.L. Qiu, G.A. Ravi, C. Dance, A. Ranson, S. Dilworth, M.M. Attallah. Fabrication of large Ti-6Al-4V structures by direct laser deposition. Journal of Alloys and Compounds. 2015, vol. 629, pp. 351-361.

6.N. D’Souza, J. Kelleher, C.L. Qiu, S.Y. Zhang, S. Gardner, R. E. Jones, D. Putman, C. Panwisawas.  The Role of Stress Relaxation and Creep during High Temperature Deformation in Ni-base Single Crystal Superalloys - Implications to Strain build-up during Directional Solidification. Acta Materialia. 2016, vol. 106, pp. 322-332.

7.C.L. Qiu, A. Fones, N.J.E. Adkins, H. Hamilton, M.M. Attallah. A new approach to develop Pd modified Ti-based alloys for biomedical application. Materials and Design. 2016, vol. 109C, pp. 98-111.

8.C.L. Qiu, G.A. Ravi, M.M. Attallah. Microstructural Control during Direct Laser Deposition of a ?-Titanium Alloy (Ti5553). Materials and Design. 2015, vol. 81, pp. 21-30.

9.C.L. Qiu, Y. Sheng, N.J.E. Adkins, M. Ward, H. Hassanin, M.M. Attallah, P.D. Lee, P.J. Withers. Influence of processing conditions on strut structure and compressive property of cellular lattice structures fabricated by selective laser melting. Materials Science and Engineering A. 2015, vol. 628, pp. 188–197.

10.C. Panwisawas, C.L. Qiu, Y. Sovani, J.W. Brooks, M.M. Attallah, H.C. Basoalto. On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting. Scripta Materialia. 2015, vol. 105, pp. 14-17.

11.C.L. Qiu, M.M. Attallah, X.H. Wu, P. Andrews. Influence of hot isostatic pressing temperature on microstructure and tensile properties of a nickel-based superalloy powder. Materials Science and Engineering A. 2013, vol. 564, pp. 176-185.

12.C.L. Qiu, X.H. Wu, J.F. Mei, P. Andrews, W. Voice. Influence of heat treatment on microstructure and tensile properties of a hot isostatically pressed nickel-based superalloy. Journal of Alloys and Compounds. 2013, vol. 578, pp.454-464.

13.C.L. Qiu, X.H. Wu. High cycle fatigue and fracture behaviour of a hot isostatically pressed nickel-based superalloy. Philosophical Magazine. 2013. Published on line: http://dx.doi.org/10.1080/14786435.2013.852287.

14.Z.W. Wu, C.L. Qiu, V. Venkatesh, H. Fraser, R. Williams, G.B. Viswanathan, M. Thomas, S. Nag, R. Banerjee, M.H. Loretto. The Influence of Precipitation of Alpha2 on Properties and Microstructure in TIMETAL 6-4. Metallurgical and Materials Transactions A. 2013, vol. 44, pp.1706-1713.